Concept IK-995035D4
$1,962.54 (incl. GST)
POSMarket SKU: Z16436
IK-995035D4: Concept 4000 Intelligent 4-Door Access Module Kit
Intelligent 4-Door Access Module Kit
Product Overview
This Intelligent 4-Door Access Module Kit contains the following components:
1 x Intelligent 2-Door Controller PCB and Accessories Kit
1 x 2-Door Plug-on Expansion Board for Intelligent 2-Door Controller
Intelligent 2 Door Access Module Intelligent 2/4 Door Access Module
The Intelligent Two Door Access Module (ITDAM) provides an interface for 1 to 4 Doors using up to 8 Readers
2-Door Plug-on Expansion Board for Intelligent 2-Door Controller
The 2-Door Expander Board allows the Intelligent 2-Door Access Module to be expanded to support up to 4 Doors. This board will also support a Plugon Reader Expander option to provide Reader In / Reader Out operation for the addtitional Doors.
Features
1 x Intelligent 2-Door Controller PCB and Accessories Kit
1 x 2-Door Plug-on Expansion Board for Intelligent 2-Door Controller
Intelligent 2 Door Access Module Intelligent 2/4 Door Access Module
The Intelligent Two Door Access Module (ITDAM) provides an interface for 1 to 4 Doors using up to 8 Readers
2-Door Plug-on Expansion Board for Intelligent 2-Door Controller
The 2-Door Expander Board allows the Intelligent 2-Door Access Module to be expanded to support up to 4 Doors. This board will also support a Plugon Reader Expander option to provide Reader In / Reader Out operation for the addtitional Doors.
Features
- On-board 3 amp power supply
- 2 on-board lock relays
- Optically isolated LAN input provides 5kV isolation for protection from surges
- Separate valid, invalid and Door Open Too Long (DOTL) output for each door
- Separate reed, tongue, Request to Enter (REN), Request to Exit (REX) & Arminputs for each reader
- All card reader interfaces operate with common magnetic swipe and Wiegandreaders without the need for any additional interfaces
- Onboard review buffer for offline operation
- Each card reader may be independently configured, allowing a combination ofcard reader technologies
- Door open too long pre warn function
- 8 General purpose Onboard zone inputs
Product Specifications
| Intelligent Two Door Access Module | |
| Part number 995036PCB&K | |
| Physical | |
| Cabinet Dimensions | 460(L) x 358(W) x 85(D) (mm) |
| Installation Environment | 0°C - 40°C @15 - 85% Relative humidity (non-condensing) |
| Electrical | PCB Versions; Transformer Versions |
| Mains Input Voltage | N/A; 240VAC 50Hz |
| Mains Input Current | N/A; Max 500mA |
| Input Voltage to PCB | 16-18VAC; 16-18VAC |
| Total Current Limit | Power supply source dependent 3A |
| Recommended current allowance for battery charging | N/A; 300mA |
| Available Current (for detectors, Power supply aux’s, relays, local LAN etc). | Source dependent; 2A |
| All versions | |
| Fuse Protection | Separate fuses for DET+, LAN, Locks & Readers |
| Operational Current (no peripherals connected) | |
| Intelligent 2DAM | 145mA (Both lock aux’s on: 240mA) |
| - Plug-on Reader Expander | Add 20mA |
| - 2 Door Expander Board | Add 30mA (Both lock aux’s on: 120mA) |
| Inputs | |
| Zone Inputs | 8 General purpose Zone Inputs |
| Door Inputs | Door reed, REX, REN, Arm & tongue sense per door |
| Reader Ports | 2 (Expandable to 8) |
| Outputs | |
| Relays | 2 (Expandable to 4, typically used for door locks) |
| Outputs (open collector) | 14 expandable to 20 (8 General purpose; separate valid, invalid and DOTL output for each door) |
| 2 Door Expander Board 2 Door Expander Board | |
| Electrical Specifications | |
| Power Supply Input | From host Intelligent 2 Door Access Module. |
| Reader Head Supply O/P | 5V or 13.75V DC 300mA maximum per Reader. |
| Current Consumption | 30mA standby. Lock Auxiliaries: 45mA per Relay for Unlocked state. (Does NOT include current drawn by peripheral devices. e.g. Readers, Locks, Sounders, Detectors, etc.) |
| NOTE: Small Prox Reader (~5-10cm range): Allow 50-120mA. Standard Prox Reader (~15cm range): Allow 120-180mA. These values are general approximations. See information supplied with Reader for actual current consumption. | |
| Lock Relay | Contact rating: 30 V DC. 1 Amp maximum. |
| Fuse Protection | Lock Power: 1A. Slow Blow M205 (20mm) |
| Reader Power | 0.5A. Fast Blow M205 (20mm) ALWAYS REPLACE FUSES WITH SAME FUSE TYPE AND VALUE |
| Maximum cable length | Europe Only. To meet EN standard 50130-4, cables connected to this device must be less than 30 metres in length. |
| Physical Specifications | |
| PCB size | 200mm x 94mm |
| Operating Environment | 0° to 40° Celsius and 15% to 80% Relative humidity (non-condensing) |
Loading configurations…
Loading accessories…
Loading downloads…
Product Videos
No videos found for this product.
Please contact our team using the Ask an Expert form or call us on 1300 737 998.
Please contact our team using the Ask an Expert form or call us on 1300 737 998.
Contact our Team
Warehouse Locations
NSW
- Huntingwood 2148
- Rosehill 2142
- Rydalmere 2116
QLD
- Acacia Ridge 4110
- Tingalpa 4173
VIC
- Box Hill 3128
WA
- Burswood 6100
Related Products
Integriti 996012PCBK
Access Control › LAN Media, Module, Unibus
Integriti IK-996005M8RPSB
Access Control › LAN Media, Module, Unibus
Integriti 996005PCB&K
Access Control › LAN Media, Module, Unibus
Fast Delivery
Express Courier Delivery
Most of our shipments are delivered using Australian courier companies such as Toll, Star Track Express, TNT or Border Express. Over 90% of orders are delivered within 2 business days.
Click & Collect
Contact our sales team to see if the item you want to purchase is available to collect from the warehouse nearest to you.
International Delivery
We have many international clients. Contact our sales team for delivery costs and times.
Cost-effective solutions to suit your business needs
POSMarket can provide your business with the hardware, software, services and consumables you need to take your business to the next level. We can develop custom software for your next project or customise a solution from off-the-shelf software to suit your needs.
Request a Consultation Today